Lock Rekeying in Broad Ripple, IN

Yes, and it is one of the busiest overnight markets in the service area. The stretch of College Avenue and Broad Ripple Avenue through the village generates steady car lockout calls between midnight and 3am on weekends. Typical arrival is 15 to 25 minutes.

Yes, and it is standard work here. Rekeying takes roughly 10 minutes per lock, so a typical student rental is done in under an hour. July and August are the busiest turnover months around Butler, so book ahead if you can.

Not always without modification. Bungalows through Meridian-Kessler, Warfleigh and Butler-Tarkington often have non-standard backsets and older mortise bodies that off-the-shelf hardware does not match. The technician measures the backset and bore before recommending hardware, and in many cases repairing the original lock is both cheaper and better suited to the door.

Give a cross street rather than just a block number. Street parking in the village is dense and addresses are hard to read at night. The nearest intersection plus the vehicle colour and make gets a technician to you noticeably faster.

Rekeying changes the pins inside the cylinder you already own so a new key works and old keys do not. Replacing swaps the entire lock for new hardware. Rekeying gives you the same security outcome for a fraction of the cost unless the hardware itself is faulty or too low grade.

About 10 minutes per cylinder. A typical house with a front knob and deadbolt, a back door and a garage service door is four to six cylinders, so roughly 45 to 60 minutes including testing and cutting keys.

Yes, immediately and permanently. Once the pin stack is rebuilt to a new bitting, the old key cannot lift the pins to the shear line, so it will not turn. There is no window where both keys work.

Most residential brands — Kwikset, Schlage, Defiant, Baldwin, Weiser and similar — are rekeyed routinely. Some high-security cylinders such as Medeco, Mul-T-Lock and Abloy require restricted keyblanks and factory authorisation, which changes the cost and lead time. Tell dispatch the brand when you book.

Rekeying handles the key risk, but not the hardware risk. After a forced entry the strike plate, jamb and door edge are often damaged, and a lock that survived is not necessarily sound. The technician inspects the whole door and will recommend reinforcing the strike with longer screws into the stud, which is what actually resists kick-ins.